CAS Number: 114460-02-5
Product Catalog

98-4006

Magnesium › Bis(ethylcyclopentadienyl)magnesium, min. 98%, 12-0510, contained in 50 ml Swagelok® cylinder (96-1070) for CVD/ALD

CAS Number:	114460-02-5
MDL Number:	MFCD00151375
Molecular Formula:
Molecular Weight:	210.60
Chemical Formula:	(C2H5C5H4)2Mg
Color and Form:	colorless to pale yellow liq.
Note:	High temperature Swagelok® cylinder assembly 96-1071 available at extra cost.

Stability: air sensitive, moisture sensitive

Safety: Hazardous

Please log in or choose your country below to view prices.

New (not in print catalog)

SECTION 1: Product Identification
Chemical Name:	Bis(ethylcyclopentadienyl)magnesium, min. 98%, 12-0510, contained in 50 ml Swagelok� cylinder (96-1070) for CVD/ALD
Product Number:	98-4006
CAS Registry Number:	114460-02-5
Formula:	(C2H5C5H4)2Mg
EINECS Number:	none
Chemical Family:	metallocene
Synonym:	ethylcyclopentadiene, magnesium salt

SECTION 2: Composition and Information on Ingredients
Ingredient	CAS Number	Percent	ACGIH (TWA)	OSHA (PEL)
Title Compound	114460-02-5	100	no data	no data

SECTION 3: Hazards Identification
Emergency Overview:	Irritating to skin, eyes and respiratory tract. May be harmful if swallowed.
Primary Routes of Exposure:	Ingestion, inhalation
Eye Contact:	Causes slight to mild irritation of the eyes.
Skin Contact:	Causes slight to mild irritation of the skin.
Inhalation:	Irritating to the nose, mucous membranes and respiratory tract.
Ingestion:	Ingestion may lead to dizziness, abdominal cramps and vomiting.
Acute Health Effects:	Irritating to skin, eyes and respiratory tract.
Chronic Health Effects:	No information available on long-term chronic effects.
NTP:	No
IARC:	No
OSHA:	No

SECTION 4: First Aid Measures
Eye Exposure:	Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure:	Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation:	Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:	Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:	no data
Autoignition Temperature:	no data
Explosion Limits:	no data
Extinguishing Medium:	carbon dioxide or dry powder
Special Fire Fighting Procedures:	If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products:	If involved in a fire, this material may emit toxic and corrosive fumes.
Unusual Fire or Explosion Hazards:	Highly flammable liquid. Formation of explosive air/vapor mixtures is possible.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:	Eliminate all potential spark sources. Small spills can be absorbed into vermiculite or other chemical adsorbent suitable for flammable materials. Sweep up the mixture and dispose of properly.

SECTION 7: Handling and Storage
Handling and Storage:	Handle and store the material under a dry inert atmosphere of nitrogen or argon. Keep away from heat.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:	Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:	Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.
Ventilation:	Handle the material in an efficient fume hood.
Respirator:	If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection:	No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:	liquid
Molecular Weight:	210.6
Melting Point:	none
Boiling Point:	no data
Vapor Pressure:	0.042mm (25?)
Specific Gravity:	no data
Odor:	none
Solubility in Water:	insoluble

SECTION 10: Stability and Reactivity
Stability:	air and moisture sensitive
Hazardous Polymerization:	no hazardous polymerization
Conditions to Avoid:	contact with moisture and mineral acids
Incompatibility:	water, alcohols, oxidizers, halogens, mineral acids
Decomposition Products:	carbon dioxide, carbon monoxide, magnesium oxides and organic fumes

SECTION 11: Toxicological Information
RTECS Data:	No information available from the RTECS files.
Carcinogenic Effects:	no data
Mutagenic Effects:	no data
Tetratogenic Effects:	no data

SECTION 12: Ecological Information
Ecological Information:	No information available.

SECTION 13: Disposal Considerations
Disposal:	Dispose of this material according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):	Flammable liquids, N.O.S.
Hazard Class (CFR):	3
Additional Hazard Class (CFR):	NA
Packaging Group (CFR):	II
UN ID Number (CFR):	UN# 1993
Shipping Name (IATA):	Flammable liquid, N.O.S.
Hazard Class (IATA):	3
Additional Hazard Class (IATA):	NA
Packaging Group (IATA):	II
UN ID Number (IATA):	UN# 1993

SECTION 15: Regulatory Information
TSCA:	Not listed in the TSCA inventory
SARA (Title 313):	Not reportable under SARA Title 313.
Second Ingredient:	none
Third Ingredient:	none

SECTION 16: Other Information
Disclaimer:	The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date:	4/21/2011
Revision Date:	4/21/2011