Search for a full or partial Catalog Number, CAS Number or description
CAS Number: 7772-99-8
Product Catalog
93-5030
Tin › Tin(II) chloride, anhydrous, 98%| CAS Number: | 7772-99-8 |
| MDL Number: | MFCD00011241 |
| Molecular Formula: | Cl2Sn |
| Molecular Weight: | 189.60 |
| Chemical Formula: | SnCl2 |
| Color and Form: | white xtl. |
| Note: |
Stability: hygroscopic
Safety: Hazardous
Physical Characteristics: melting point 246.8°C, boiling point 623°C
| SECTION 1: Product Identification | |
|---|---|
| Chemical Name: | Tin (II) chloride, anhydrous,98% |
| Product Number: | 93-5030 |
| CAS Registry Number: | 7772-99-8 |
| Formula: | SnCl2 |
| EINECS Number: | 231-868-0 |
| Chemical Family: | metal halide |
| Synonym: | Dichlorotin, Stannous chloride, Tin dichloride |
| SECTION 2: Composition and Information on Ingredients | ||||
|---|---|---|---|---|
| Ingredient | CAS Number | Percent | ACGIH (TWA) | OSHA (PEL) |
| Title Compound | 7772-99-8 | 100 | 2mg/m3 | 2mg/m3 |
| SECTION 3: Hazards Identification | |
|---|---|
| Emergency Overview: | Corrosive to skin and eyes. Inhalation of dust leads to burns of the respiratory tract. |
| Primary Routes of Exposure: | Contact with skin and eyes. Inhalation of dust. |
| Eye Contact: | Causes burns to the eyes. |
| Skin Contact: | Causes burns to the skin. |
| Inhalation: | Inhalation of dust can lead to caustic burns of the respiratory tract. |
| Ingestion: | Harmful if swallowed. |
| Acute Health Effects: | Corrosive to skin, eyes and respiratory tract. |
| Chronic Health Effects: | Prolonged exposure to dust of tin compounds may result in benign pneumoconiosis. |
| NTP: | No |
| IARC: | No |
| OSHA: | No |
| SECTION 4: First Aid Measures | |
|---|---|
| Eye Exposure: | Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention. |
| Skin Exposure: | Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. |
| Inhalation: | Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. |
| Ingestion: | Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel. |
| SECTION 5: Fire Fighting Measures | |
|---|---|
| Flash Point: | not applicable |
| Autoignition Temperature: | none |
| Explosion Limits: | none |
| Extinguishing Medium: | None. Material is non-flammable. |
| Special Fire Fighting Procedures: | If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing. |
| Hazardous Combustion and Decomposion Products: | none |
| Unusual Fire or Explosion Hazards: | No unusual fire or explosion hazards. |
| SECTION 6: Accidental Release Measures | |
|---|---|
| Spill and Leak Procedures: | To avoid raising dust, small spills may be mixed with diatomaceous earth, sand, vermiculite or other suitable inert material and swept up. |
| SECTION 7: Handling and Storage | |
|---|---|
| Handling and Storage: | Store solid in a tightly sealed container away from moisture. Handle under a dry atmosphere of air or nitrogen. Prolonged exposure to the atmosphere may degrade the product. |
| SECTION 8: Exposure Controls and Personal Protection | |
|---|---|
| Eye Protection: | Always wear approved safety glasses when handling a chemical substance in the laboratory. |
| Skin Protection: | Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove. |
| Ventilation: | Solid may form a fine dust. If possible, handle the solid in an efficient fume hood. |
| Respirator: | If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134. |
| Additional Protection: | No additional protection required. |
| SECTION 9: Physical and Chemical Properties | |
|---|---|
| Color and Form: | white xtl. |
| Molecular Weight: | 189.6 |
| Melting Point: | 246.8°C |
| Boiling Point: | 623°C |
| Vapor Pressure: | no data |
| Specific Gravity: | no data |
| Odor: | none |
| Solubility in Water: | 83.9g/100cc (6°C) |
| SECTION 10: Stability and Reactivity | |
|---|---|
| Stability: | hygroscopic |
| Hazardous Polymerization: | no hazardous polymerization |
| Conditions to Avoid: | contact with moisture |
| Incompatibility: | active metals |
| Decomposition Products: | none |
| SECTION 11: Toxicological Information | |
|---|---|
| RTECS Data: | Oral (rat); LD50: 700 mg/kg. Intraperitoneal (rat); LD50: 316 mg/kg. Intravenous (rat); LD50: 43 mg/kg. Oral (rat); TDLo: 8251 mg/kg/4W-C. Inhalation (rat); TCLo: 3 mg/m3/24H/5W-C. Intratesticular (rat): TDLo: 15167 ug/kg. Bacteria-Escherichia coli; Mutation test systems-not otherwise specified: 150 nmol/tube. Hamster ovary; Cytogenetic analysis: 25 mg/L. |
| Carcinogenic Effects: | Tumorigen |
| Mutagenic Effects: | Possible mutagen |
| Tetratogenic Effects: | Reproductive effector |
| SECTION 12: Ecological Information | |
|---|---|
| Ecological Information: | No information available |
| SECTION 13: Disposal Considerations | |
|---|---|
| Disposal: | Dispose of according to local, state and federal regulations. |
| SECTION 14: Transportation | |
|---|---|
| Shipping Name (CFR): | Corrosive Solids, Acidic, Inorganic, N.O.S. |
| Hazard Class (CFR): | 8 |
| Additional Hazard Class (CFR): | NA |
| Packaging Group (CFR): | II |
| UN ID Number (CFR): | UN# 3260 |
| Shipping Name (IATA): | Corrosive Solid, Acidic, Inorganic, N.O.S. |
| Hazard Class (IATA): | 8 |
| Additional Hazard Class (IATA): | NA |
| Packaging Group (IATA): | II |
| UN ID Number (IATA): | UN# 3260 |
| SECTION 15: Regulatory Information | |
|---|---|
| TSCA: | Listed in the TSCA inventory. |
| SARA (Title 313): | Title compound not listed. |
| Second Ingredient: | none |
| Third Ingredient: | none |
| SECTION 16: Other Information | |
|---|---|
| Disclaimer: | The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information. |
| Preparation Date: | 6/11/2001 |
| Revision Date: | 12/16/2011 |
