Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

CAS Number: 7783-52-0
Product Catalog

49-1500
Indium Indium(III) fluoride, anhydrous, 98%
CAS Number: 7783-52-0
MDL Number: MFCD00016149
Molecular Formula: F3In
Molecular Weight: 171.82
Chemical Formula: InF3
Color and Form: white pwdr.
Note:  

Stability: hygroscopic

Physical Characteristics: melting point ~1170°C, boiling point > 1200°C

Please log in or choose your country below to view prices.

Choose Your Country

SECTION 1: Product Identification
Chemical Name: Indium (III) fluoride, anhydrous, 98%
Product Number: 49-1500
CAS Registry Number: 7783-52-0
Formula: InF3
EINECS Number: 232-005-0
Chemical Family: metal halide
Synonym: Indium trifluoride
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 7783-52-0 100 0.1mg/m3 (as In) no data
SECTION 3: Hazards Identification
Emergency Overview: Irritating to the respiratory tract, skin and eyes. May be harmful if swallowed.
Primary Routes of Exposure: Ingestion, inhalation, skin, eyes
Eye Contact: Causes serious eye damage. Effects may not immediately appear.
Skin Contact: Prolonged contact with skin may cause delayed deep slow healing painful burns.
Inhalation: Irritating to skin, eyes and respiratory tract.
Ingestion: May cause salivation, nausea, vomiting, diarrhea, and painful abdominal burns.
Acute Health Effects: Irritating to skin, eyes and respiratory tract. Fluoride poisoning may cause nausea, vomiting, diarrhea, weakness, coma, and respiratory paralysis.
Chronic Health Effects: Prolonged exposure to soluble fluorine compounds can cause deterioration of bone and tooth structure, and kidney damage.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Apply calcium gluconate jelly or water soluble calcium salts as antidote. Seek medical assistance.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: none
Explosion Limits: none
Extinguishing Medium: none required
Special Fire Fighting Procedures: If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: If involved in a fire this material may emit corrosive hydrogen fluoride fumes.
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: To avoid raising dust, small spills can be mixed with powdered sodium bicarbonate, lime, or calcium carbonate and swept up.
SECTION 7: Handling and Storage
Handling and Storage: Store material in a tightly sealed bottle away from moisture. If possible, handle material in an efficient fume hood. Prolonged exposure to the atmosphere may lead to degradation of the product.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear appropriate chemical resistant gloves and protective clothing.
Ventilation: If possible, handle the material in an efficient fume hood.
Respirator: If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: white pwdr.
Molecular Weight: 171.82
Melting Point: ~1170°C
Boiling Point: >1200°C
Vapor Pressure: no data
Specific Gravity: no data
Odor: none
Solubility in Water: slightly soluble
SECTION 10: Stability and Reactivity
Stability: hygroscopic
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: contact with moisture
Incompatibility: Mineral acids and active metals
Decomposition Products: with moisture: hydrofluoric acid and indium oxides
SECTION 11: Toxicological Information
RTECS Data: No information available in the RTECS files.
Carcinogenic Effects: no data
Mutagenic Effects: no data
Tetratogenic Effects: no data
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Listed in the TSCA inventory.
SARA (Title 313): Title compound not listed
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 8/21/2001
Revision Date: 12/13/2011

Enter a lot number

back to search results