Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

CAS Number: 21797-13-7
Product Catalog

46-2145
Palladium › Tetrakis(acetonitrile)palladium(II) tetrafluoroborate, 99%
CAS Number: 21797-13-7
MDL Number: MFCD00043297
Molecular Formula: C8H12B2F8N4Pd
Molecular Weight: 444.22
Chemical Formula: Pd(CH3CN)4(BF4)2
Color and Form: yellow pwdr.
Note:  

Stability: air sensitive, light sensitive

Please log in or choose your country below to view prices.

Choose Your Country

Download This MSDS
SECTION 1: Product Identification
Chemical Name: Tetrakis(acetonitrile)palladium (II) tetrafluoroborate, 99%
Product Number: 46-2145
CAS Registry Number: 21797-13-7
Formula: Pd(CH3CN)4(BF4)2
EINECS Number: None
Chemical Family: organometallic complex
Synonym: Palladium(II)tetrafluoroborate, acetonitrile complex.
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 21797-13-7 100 2.5mg/m3 (as F) 2.5mg/m3 (as F)
SECTION 3: Hazards Identification
Emergency Overview: Irritating to the respiratory tract, skin and eyes. May be harmful if swallowed.
Primary Routes of Exposure: Ingestion, inhalation
Eye Contact: Causes slight to mild irritation of the eyes.
Skin Contact: Causes slight to mild irritation of the skin.
Inhalation: Irritating to skin, eyes and respiratory tract.
Ingestion: Ingestion may lead to fluoride poisoning, dizziness, abdominal cramps, vomiting, bloody diarrhea, weakness, and convulsions.
Acute Health Effects: Irritating to skin, eyes and respiratory tract.
Chronic Health Effects: No specific information available on toxicity or the effects of overexposure. Chronic fluoride poisoning can cause severe bone changes, loss of weight, and dental defects.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: none
Explosion Limits: none
Extinguishing Medium: carbon dioxide, foam or dry powder
Special Fire Fighting Procedures: If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self- contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: If involved in a fire this material may emit toxic and corrosive fumes.
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and swept up.
SECTION 7: Handling and Storage
Handling and Storage: Material will react with air. Handle and store the material under an inert atmosphere of nitrogen or argon. Keep away from heat.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear protective clothing and gloves.
Ventilation: To minimize exposure, handle the material in an efficient fume hood.
Respirator: If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: yellow pwdr.
Molecular Weight: 444.22
Melting Point: no data
Boiling Point: no data
Vapor Pressure: not applicable
Specific Gravity: no data
Odor: none
Solubility in Water: soluble
SECTION 10: Stability and Reactivity
Stability: air sensitive, light sensitive
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: none
Incompatibility: oxidizing agents and active metals
Decomposition Products: carbon dioxide, carbon monoxide, nitrogen oxides, hydrogen fluoride, organic fumes, and palladium salts.
SECTION 11: Toxicological Information
RTECS Data: No information available in the RTECS files.
Carcinogenic Effects: No data
Mutagenic Effects: No data
Tetratogenic Effects: No data
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Not listed in the TSCA inventory.
SARA (Title 313): Not regulated by Title 313.
Second Ingredient: None
Third Ingredient: None
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 4/22/2002
Revision Date: 12/13/2011

Enter a lot number

back to search results