Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

CAS Number: 84365-55-9
Product Catalog

22-0950
Titanium › Indenyltitanium trichloride, 99%
CAS Number: 84365-55-9
MDL Number: MFCD00269849
Molecular Formula: C9H7Cl3Ti
Molecular Weight: 269.39
Chemical Formula: C9H7TiCl3
Color and Form: purple xtl.
Note:  

Stability: air sensitive, moisture sensitive

Safety: Hazardous

Please log in or choose your country below to view prices.

Choose Your Country

Download This MSDS
SECTION 1: Product Identification
Chemical Name: Indenyltitanium trichloride, 99%
Product Number: 22-0950
CAS Registry Number: 84365-55-9
Formula: C9H7TiCl3
EINECS Number: none
Chemical Family: arene-metal complex
Synonym: Trichloroindenyltitanium
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 84365-55-9 100 no data no data
SECTION 3: Hazards Identification
Emergency Overview: Corrosive to the upper respiratory tract, eyes and skin. Solid slowly hydrolyzes in contact with moisture releasing corrosive hydrogen chloride fumes.
Primary Routes of Exposure: Ingestion, inhalation, skin, eyes.
Eye Contact: Dust and vapors cause burns to the eyes and blindness.
Skin Contact: Corrosive to skin. Contact can lead to redness, pain, blistering, ulceration and scar formation.
Inhalation: Inhalation of dust results in caustic burns to the respiratory tract, chemical pneumonitis and pulmonary edema.
Ingestion: Ingestion is unlikely due to pungent choking odor. Causes burns to the gastrointestinal system.
Acute Health Effects: Inhalation of large amounts of dust would be extremely destructive to tissue of the mucous membranes and upper respiratory tract, skin and eyes.
Chronic Health Effects: No information available on long-term chronic effects.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: no data
Autoignition Temperature: no data
Explosion Limits: no data
Extinguishing Medium: carbon dioxide or dry powder
Special Fire Fighting Procedures: If this product is involved in a fire, firefighters should be equipped with NIOSH approved positive pressure self-contained breathing apparatus.
Hazardous Combustion and Decomposion Products: If involved in a fire this product may emit toxic and corrosive fumes.
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: Sweep up the solids and dispose of properly.
SECTION 7: Handling and Storage
Handling and Storage: Store the material in a sealed container. Keep away from heat and moisture.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear protective clothing and gloves.
Ventilation: If possible, handle the material in an efficient fume hood.
Respirator: If ventilation is not available a respirator should be worn. The use of respirators requires a Respiratory Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: purple xtl.
Molecular Weight: 269.39
Melting Point: no data
Boiling Point: no data
Vapor Pressure: no data
Specific Gravity: no data
Odor: not determined
Solubility in Water: reacts with water
SECTION 10: Stability and Reactivity
Stability: air and moisture sensitive
Hazardous Polymerization: No hazardous polymerization.
Conditions to Avoid: none
Incompatibility: oxidizing agents and active metals
Decomposition Products: carbon monoxide, carbon dioxide, hydrogen chloride, chlorinated organics, titanium salts and organic fumes.
SECTION 11: Toxicological Information
RTECS Data: No information available in the RTECS files.
Carcinogenic Effects: no data
Mutagenic Effects: no data
Tetratogenic Effects: no data
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Corrosive solids, N.O.S.
Hazard Class (CFR): 8
Additional Hazard Class (CFR): NA
Packaging Group (CFR): II
UN ID Number (CFR): UN# 1759
Shipping Name (IATA): Corrosive solid, N.O.S.
Hazard Class (IATA): 8
Additional Hazard Class (IATA): NA
Packaging Group (IATA): II
UN ID Number (IATA): UN# 1759
SECTION 15: Regulatory Information
TSCA: Not listed in the TSCA inventory.
SARA (Title 313): Title compound not listed
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 2/09/2004
Revision Date: 8/02/2011

back to search results