Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

CAS Number: 18820-29-6
Product Catalog

93-2524
Manganese Manganese(II) sulfide (99.9%-Mn)
CAS Number: 18820-29-6
MDL Number: MFCD00014210
Molecular Formula: MnS
Molecular Weight: 87.00
Chemical Formula: MnS
Color and Form: -325 mesh green pwdr.
Note:  

Physical Characteristics: melting point dec., density 3.99

Please log in or choose your country below to view prices.

Choose Your Country

SECTION 1: Product Identification
Chemical Name: Manganese (II) sulfide (99.9%-Mn)
Product Number: 93-2524
CAS Registry Number: 18820-29-6
Formula: MnS
EINECS Number: 242-599-3
Chemical Family: metal chalcogenides
Synonym: Manganous sulfide
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 18820-29-6 100 0.2mg/m3 (as Mn) 5mg/m3 (as Mn)
SECTION 3: Hazards Identification
Emergency Overview: Affects central nervous system. May form toxic and flammable hydrogen sulfide gas on exposure to acids or stomach fluids. Irritating to skin, eyes, and mucous membranes.
Primary Routes of Exposure: Ingestion, inhalation, skin and eyes
Eye Contact: Causes moderate irritation of the eyes.
Skin Contact: Causes slight irritation of the skin.
Inhalation: Inhalation of dust will lead to irritation of the respiratory tract. Hydrogen sulfide gas, if formed, is poisonous.
Ingestion: No information available on the physiological effects of ingestion.
Acute Health Effects: Irritating to skin, eyes and respiratory tract. Hydrogen sulfide gas may cause painful conjunctivitis, headache, nausea, dizziness, pulmonary edema and possible death.
Chronic Health Effects: Prolonged exposure to manganese containing dust may produce manganese pneumonitis and manganese poisoning. Symptoms include sleepiness, weakness and emotional disturbances. Equivocal studies have shown manganese may decrease fertility in men.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: no data
Explosion Limits: no data
Extinguishing Medium: carbon dioxide or dry powder
Special Fire Fighting Procedures: If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self- contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: If involved in a fire this material may emit irritating fumes of hydrogen sulfide and sulfur dioxide.
Unusual Fire or Explosion Hazards: Dust may form explosive mixtures with air. Contact with acids gives off hydrogen sulfide, a toxic and flammable gas.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: In the case of a spill, the fine powder should be covered with dry sodium carbonate or dolomite in order to reduce the formation of dust. Sweep up the mixture.
SECTION 7: Handling and Storage
Handling and Storage: Store in a tightly sealed container. Exposure to the atmosphere may lead to release of toxic hydrogen sulfide gas. Empty containers may retain product residues that evolve toxic gases.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear appropriate chemical resistant gloves and protective clothing.
Ventilation: If possible, handle the material in an efficient fume hood.
Respirator: If ventilation is not available a respirator should be worn. The use of a respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: -325 mesh green pwdr.
Molecular Weight: 87
Melting Point: dec.
Boiling Point: no data
Vapor Pressure: not applicable
Specific Gravity: 3.99
Odor: none
Solubility in Water: .00047g/100cc (18°C)
SECTION 10: Stability and Reactivity
Stability: air and moisture stable
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: Contact of dust cloud with an ignition source.
Incompatibility: Oxidizing agents, mineral acids and active metals
Decomposition Products: hydrogen sulfide, sulfur dioxide, and metal oxides.
SECTION 11: Toxicological Information
RTECS Data: No information available in the RTECS files.
Carcinogenic Effects: no data
Mutagenic Effects: no data
Tetratogenic Effects: no data
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Listed in the TSCA inventory.
SARA (Title 313): Title compound: see category code N450 for reporting.
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 10/29/2001
Revision Date: 12/14/2011

Enter a lot number

back to search results