Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

Product Catalog
CAS Number: 7647-10-1

46-1850
Palladium Palladium(II) chloride (99.9%-Pd)
CAS Number: 7647-10-1
MDL Number: MFCD00003558
Molecular Formula: Cl2Pd
Molecular Weight: 177.31
Chemical Formula: PdCl2
Color and Form: rust colored xtl.
Note: Palladium Kit component.

Stability: hygroscopic

Physical Characteristics: melting point 500°C dec., density 4.0

46-1850

Please log in or choose your country below to view prices.

Choose Your Country

SECTION 1: Product Identification
Chemical Name: Palladium (II) chloride (99.9%-Pd)
Product Number: 46-1850
CAS Registry Number: 7647-10-1
Formula: PdCl2
EINECS Number: 231-596-2
Chemical Family: metal halide
Synonym: Palladous chloride
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 7647-10-1 100 no data no data
SECTION 3: Hazards Identification
Emergency Overview: Irritating to the respiratory tract, skin and eyes. May be harmful if swallowed.
Primary Routes of Exposure: Contact with skin and eyes. Inhalation of dust.
Eye Contact: Causes irritation to the eyes.
Skin Contact: Causes slight irritation of the skin.
Inhalation: Inhalation of dust leads to irritation of the respiratory tract.
Ingestion: No information is available on the physiological effects of ingestion.
Acute Health Effects: Irritating to skin, eyes and respiratory tract.
Chronic Health Effects: May cause dermatitis and skin sensitization on long-term exposure.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: none
Explosion Limits: none
Extinguishing Medium: none required
Special Fire Fighting Procedures: If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: none
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: To avoid raising dust, small spills may be mixed with diatomaceous earth, sand, vermiculite or other suitable inert material and swept up.
SECTION 7: Handling and Storage
Handling and Storage: Store solid in a tightly sealed container.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear appropriate chemical resistant gloves and protective clothing.
Ventilation: If possible, handle the material in an efficient fume hood.
Respirator: If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: rust colored xtl.
Molecular Weight: 177.31
Melting Point: 500°C dec.
Boiling Point: no data
Vapor Pressure: not applicable
Specific Gravity: 4
Odor: none
Solubility in Water: insoluble
SECTION 10: Stability and Reactivity
Stability: hygroscopic
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: contact with moisture
Incompatibility: active metals
Decomposition Products: none
SECTION 11: Toxicological Information
RTECS Data: Administration onto the skin (rabbit); Standard Draize test: 100 mg/24H. Oral (rat); LD50: 2704 mg/kg. Intraperitoneal (rat); LD50: 70 mg/kg. Intratracheal (rat); LD50: 6 mg/kg. Oral (mouse); LD50: >1 gm/kg. Intraperitoneal (mouse); LD50: 87 mg/kg. Intravenous (rabbit); LDLo: 18600 ug/kg. Administration onto the skin (rabbit); TDLo:216 mg/kg/56D-I. Intravenous (rabbit); TDLo: 1240 ug/kg/10D-I. Oral (mouse); TDLo: 880 mg/kg/75W-C. Intramuscular (rat); TDLo: 3546 ug/kg. Subcutaneous (mouse); TDLo: 3546 ug/kg. Human Lymphocyte; DNA inhibition: 600 umol/L.
Carcinogenic Effects: Insufficient data
Mutagenic Effects: Negative data
Tetratogenic Effects: Insufficient data
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Listed in the TSCA inventory.
SARA (Title 313): Title compound not listed
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 8/21/2001
Revision Date: 6/11/2010

Enter a lot number

back to search results