Product Catalog

42-1600

Molybdenum › Oxodiperoxy(pyridine)(1,3-dimethyl-3,4,5,6-tetrahydro-2(1H)-pyrimidinone)molybdenum(IV), min. 95%

Stability: heat sensitive, light sensitive, store cold

Safety: Hazardous

Physical Characteristics: melting point dec.

Please log in or choose your country below to view prices.

Buy 5 - 9 of an item and get a 5% discount.
Buy 10 or more of an item and get a 10% discount.

SECTION 1: Product Identification
Chemical Name:	Oxodiperoxy(pyridine)(1,3-dimethyl-3,4,5,6-tetrahydro-2(1H)-pyrimidinone) molybdenum (IV), min. 95%
Product Number:	42-1600
CAS Registry Number:	128575-71-3
Formula:	MoO5(C5H5N)(C6H12N2O)
EINECS Number:	none
Chemical Family:	organometallic compound
Synonym:	None

SECTION 2: Composition and Information on Ingredients
Ingredient	CAS Number	Percent	ACGIH (TWA)	OSHA (PEL)
Title Compound	128575-71-3	100	10mg/m3 (as	15mg/m3 (as

SECTION 3: Hazards Identification
Emergency Overview:	Strong oxidizer. Irritating to skin, eyes and respiratory tract. May be harmful if swallowed or inhaled.
Primary Routes of Exposure:	Ingestion, skin, eyes
Eye Contact:	Causes irritation to the eyes.
Skin Contact:	Causes redness and irritation to the skin.
Inhalation:	Severly irritating to the nose, mucous membranes and respiratory tract.
Ingestion:	Ingestion may cause burns and edema of the gasto-intestinal system; shock with fall of blood pressure. May be fatal.
Acute Health Effects:	Ingestion causes severe irritation of the throat, abdominal pain and swelling of the throat. Irritating to skin, eyes and respiratory tract.
Chronic Health Effects:	No information on long term exposure.
NTP:	No
IARC:	No
OSHA:	No

SECTION 4: First Aid Measures
Eye Exposure:	Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure:	Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation:	Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:	Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:	not applicable
Autoignition Temperature:	none
Explosion Limits:	none
Extinguishing Medium:	carbon dioxide, dry powder or foam
Special Fire Fighting Procedures:	If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products:	If involved in a fire this material may emit toxic organic fumes.
Unusual Fire or Explosion Hazards:	Material may react violently with reducing agents or fuels. Oxidizer.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:	Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:	Store in a sealed amber container. Avoid prolonged contact with light. Store cold.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:	Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:	Wear appropriate chemical resistant gloves and clothing.
Ventilation:	Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Respirator:	If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection:	No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:	pale yellow xtl
Molecular Weight:	383.21
Melting Point:	decomposes
Boiling Point:	no data
Vapor Pressure:	no data
Specific Gravity:	no data
Odor:	none
Solubility in Water:	insoluble

SECTION 10: Stability and Reactivity
Stability:	light-senstive solid
Hazardous Polymerization:	no hazardous polymerization
Conditions to Avoid:	Avoid contact with heat and reducing agents
Incompatibility:	Reducing agents and fuels. Phosphorus, sulfur and halogens. Material may decompose violently if heated. Reacts violently with DMSO.
Decomposition Products:	Carbon dioxide, carbon monoxide, organic vapors, soot, and molybdenum oxides.

SECTION 11: Toxicological Information
RTECS Data:	No information available in the RTECS files.
Carcinogenic Effects:	No data available
Mutagenic Effects:	No data available
Tetratogenic Effects:	No data available

SECTION 12: Ecological Information
Ecological Information:	No information available

SECTION 13: Disposal Considerations
Disposal:	Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):	Oxidizing Solid, N.O.S.
Hazard Class (CFR):	5.1
Additional Hazard Class (CFR):	NA
Packaging Group (CFR):	II
UN ID Number (CFR):	UN# 1479
Shipping Name (IATA):	Oxidizing Solid, N.O.S.
Hazard Class (IATA):	5.1
Additional Hazard Class (IATA):	NA
Packaging Group (IATA):	II
UN ID Number (IATA):	UN# 1479

SECTION 15: Regulatory Information
TSCA:	Not listed in the TSCA inventory.
SARA (Title 313):	Title compound not listed.
Second Ingredient:	none
Third Ingredient:	none

SECTION 16: Other Information
Disclaimer:	The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date:	6/16/2004
Revision Date:	1/22/2008