Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

Product Catalog
CAS Number: 7440-47-3

24-0020
Chromium Chromium chips (99.99%)
CAS Number: 7440-47-3
MDL Number: MFCD00010944
Molecular Formula: Cr
Molecular Weight: 52.01
Chemical Formula: Cr
Color and Form: 1.5mm thick
Note:  

Physical Characteristics: melting point 1890°C, boiling point 2200°C, density 7.20

Please log in or choose your country below to view prices.

Choose Your Country

SECTION 1: Product Identification
Chemical Name: Chromium chips (99.99%)
Product Number: 24-0020
CAS Registry Number: 7440-47-3
Formula: Cr
EINECS Number: 231-157-5
Chemical Family: metal or element
Synonym: Chrome
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 7440-47-3 100 0.5mg/m3 (as Cr) 1mg/m3 (as Cr)
SECTION 3: Hazards Identification
Emergency Overview: Inhalation hazard as a fine dust or fume.
Primary Routes of Exposure: Inhalation (of dust or fume)
Eye Contact: The dust may cause slight to mild irritation of the eyes.
Skin Contact: The dust may cause slight to mild irritation of the skin.
Inhalation: Hazard associated with inhalation of fine dust or fume. May be irritating to nasal cavity and respiratory tract.
Ingestion: No specific information is available on the physiological effects of ingestion.
Acute Health Effects: Dust may be irritating to skin, eyes and respiratory tract.
Chronic Health Effects: No information available on health effects of prolonged or repeated exposure . Carcinogenic if converted to hexavalent chromium.
NTP: yes
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: (For dust) Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: (For dust) Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: (For dust) Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical intention immediately. Keep victim calm. Give victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: not applicable
Explosion Limits: not applicable
Extinguishing Medium: None. Material is non-flammable.
Special Fire Fighting Procedures: No special fire fighting procedures required for this material.
Hazardous Combustion and Decomposion Products: none
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: Spills can simply be swept up.
SECTION 7: Handling and Storage
Handling and Storage: No special storage or handling conditions required.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear protective clothing and gloves.
Ventilation: If in the form of a fine dust, handle the material in an efficient fume hood.
Respirator: If handling material in the form of a fine dust and ventilation is not available, a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: 1.5mm thick
Molecular Weight: 52.01
Melting Point: 1890°C
Boiling Point: 2200°C
Vapor Pressure: 1mm (1617 °C)
Specific Gravity: 7.2
Odor: none
Solubility in Water: Insoluble
SECTION 10: Stability and Reactivity
Stability: air and moisture stable
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: none
Incompatibility: Mineral acids, halogens, sulfur and oxidizing agents
Decomposition Products: none
SECTION 11: Toxicological Information
RTECS Data: Unreported (rat); LD50: 27500 ug/kg. Intravenous (rat); TDLo: 2160 ug/kg/6W-I. Implant (rat); TDLo: 1200 ug/kg/6W-I. Implant (rabbit); TDLo: 75 mg/kg.
Carcinogenic Effects: No definitive data
Mutagenic Effects: Insufficient data
Tetratogenic Effects: No data available
SECTION 12: Ecological Information
Ecological Information: No information available.
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state, and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Listed in the TSCA inventory
SARA (Title 313): Reportable under SARA 313.
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 12/12/2000
Revision Date: 10/04/2011

back to search results