Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

Product Catalog
CAS Number: 174500-20-0

07-0304
Nitrogen (-)-2,6-Bis[(4S)-4-phenyl-2-oxazolin-2-yl]pyridine, 98+%
CAS Number: 174500-20-0
MDL Number: MFCD01863586
Molecular Formula: C23H19N3O2
Molecular Weight: 369.42
Chemical Formula: C23H19N3O2
Color and Form: white xtl.
Note:  

Physical Characteristics: melting point 171-175°C, spec. rotation -224° (c 1, CHCl3)

Please log in or choose your country below to view prices.

Choose Your Country

SECTION 1: Product Identification
Chemical Name: (-)-2,6-Bis[(4S)-4-phenyl-2-oxazolin-2-yl]pyridine, 98+%
Product Number: 07-0304
CAS Registry Number: 174500-20-0
Formula: C23H19N3O2
EINECS Number: none
Chemical Family: organic amine
Synonym: (R-(R*,R*))-2,6-bis(4,5-dihydro-4-phenyl-2-oxazolyl)pyridine
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title compound 174500-20-0 100 no data no data
SECTION 3: Hazards Identification
Emergency Overview: As dust the product is an irritant to the skin, eyes, mucous membranes and upper respiratory tract. May be harmful if swallowed.
Primary Routes of Exposure: Ingestion
Eye Contact: May cause moderate irritation of the eyes.
Skin Contact: May cause slight to moderate irritation of the skin.
Inhalation: Dust may be irritating to the nose, mucous membranes and respiratory tract.
Ingestion: No specific information on the physiological effects of ingestion.
Acute Health Effects: May be irritating to skin, eyes and respiratory tract.
Chronic Health Effects: The health effects resulting from prolonged exposure to this compound have not been thoroughly investigated. Unrecognized hazards may be present.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: none
Explosion Limits: none
Extinguishing Medium: dry chemical, carbon dioxide, or foam.
Special Fire Fighting Procedures: If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: If involved in a fire this material may emit toxic organic fumes.
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and swept up.
SECTION 7: Handling and Storage
Handling and Storage: Store material in a tightly sealed bottle away from heat and direct sunlight.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear appropriate chemical resistant gloves and clothing.
Ventilation: Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Respirator: If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: white xtl.
Molecular Weight: 369.42
Melting Point: 171-175°C
Boiling Point: no data
Vapor Pressure: no data
Specific Gravity: no data
Odor: none
Solubility in Water: slightly soluble
SECTION 10: Stability and Reactivity
Stability: air and moisture stable
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: mixing with strong acids
Incompatibility: strong oxidizing agents
Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen, nitrogen oxides, and water vapor
SECTION 11: Toxicological Information
RTECS Data: No information available in the RTECS files.
Carcinogenic Effects: No data available
Mutagenic Effects: No data available
Tetratogenic Effects: No data available
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Not listed in the TSCA inventory.
SARA (Title 313): Not reportable under SARA Title 313
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 5/23/2004
Revision Date: 9/27/2011

Enter a lot number

back to search results