| CAS Number: | 128249-70-7 |
| MDL Number: | MFCD01863585 |
| Molecular Formula: | C23H19N3O2 |
| Molecular Weight: | 369.42 |
| Chemical Formula: | C23H19N3O2 |
| Color and Form: | white xtl. |
| Note: |
Physical Characteristics: melting point 171-175°C, spec. rotation +228° (c 1, CHCl3)
| SECTION 1: Product Identification | |
|---|---|
| Chemical Name: | (+)-2,6-Bis[(4R)-4-phenyl-2-oxazolin-2-yl]pyridine, 98+% |
| Product Number: | 07-0303 |
| CAS Registry Number: | 128249-70-7 |
| Formula: | C23H19N3O2 |
| EINECS Number: | none |
| Chemical Family: | organic amine |
| Synonym: | (R-(R*,R*))-2,6-bis(4,5-dihydro-4-phenyl-2-oxazolyl)pyridine |
| SECTION 2: Composition and Information on Ingredients | ||||
|---|---|---|---|---|
| Ingredient | CAS Number | Percent | ACGIH (TWA) | OSHA (PEL) |
| Title compound | 128249-70-7 | 100 | no data | no data |
| SECTION 3: Hazards Identification | |
|---|---|
| Emergency Overview: | As dust the product may be an irritant to the skin, eyes, mucous membranes and upper respiratory tract. May be harmful if swallowed. |
| Primary Routes of Exposure: | Ingestion, inhalation of dust. Eyes and skin. |
| Eye Contact: | May cause moderate irritation of the eyes. |
| Skin Contact: | May cause slight to moderate irritation of the skin. |
| Inhalation: | Dust may be irritating to the nose, mucous membranes and respiratory tract. |
| Ingestion: | No specific information on the physiological effects of ingestion. |
| Acute Health Effects: | May be irritating to skin, eyes and respiratory tract. |
| Chronic Health Effects: | The health effects resulting from prolonged exposure to this compound have not been thoroughly investigated. Unrecognized hazards may be present. |
| NTP: | No |
| IARC: | No |
| OSHA: | No |
| SECTION 4: First Aid Measures | |
|---|---|
| Eye Exposure: | Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention. |
| Skin Exposure: | Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. |
| Inhalation: | Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. |
| Ingestion: | Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel. |
| SECTION 5: Fire Fighting Measures | |
|---|---|
| Flash Point: | not applicable |
| Autoignition Temperature: | none |
| Explosion Limits: | none |
| Extinguishing Medium: | carbon dioxide, dry powder or foam |
| Special Fire Fighting Procedures: | If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing. |
| Hazardous Combustion and Decomposion Products: | If involved in a fire this material may emit toxic organic fumes. |
| Unusual Fire or Explosion Hazards: | No unusual fire or explosion hazards. |
| SECTION 6: Accidental Release Measures | |
|---|---|
| Spill and Leak Procedures: | Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and swept up. |
| SECTION 7: Handling and Storage | |
|---|---|
| Handling and Storage: | Store material in a tightly sealed bottle away from heat and direct sunlight. If possible, handle material in an efficient fume hood. |
| SECTION 8: Exposure Controls and Personal Protection | |
|---|---|
| Eye Protection: | Always wear approved safety glasses when handling a chemical substance in the laboratory. |
| Skin Protection: | Wear appropriate chemical resistant gloves and protective clothing. |
| Ventilation: | Material may form a fine dust. If possible, handle the material in an efficient fume hood. |
| Respirator: | If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134. |
| Additional Protection: | No additional protection required. |
| SECTION 9: Physical and Chemical Properties | |
|---|---|
| Color and Form: | white xtl. |
| Molecular Weight: | 369.42 |
| Melting Point: | 171-175°C |
| Boiling Point: | no data |
| Vapor Pressure: | no data |
| Specific Gravity: | no data |
| Odor: | none |
| Solubility in Water: | slightly soluble |
| SECTION 10: Stability and Reactivity | |
|---|---|
| Stability: | air and moisture stable |
| Hazardous Polymerization: | no hazardous polymerization |
| Conditions to Avoid: | mixing with strong acids |
| Incompatibility: | oxidizing agents, nitric acid, perchloric acid, sulfuric acid and halogens |
| Decomposition Products: | Carbon dioxide, carbon monoxide, nitrogen, nitrogen oxides, and water vapor |
| SECTION 11: Toxicological Information | |
|---|---|
| RTECS Data: | No information available in the RTECS files. |
| Carcinogenic Effects: | No data available |
| Mutagenic Effects: | No data available |
| Tetratogenic Effects: | No data available |
| SECTION 12: Ecological Information | |
|---|---|
| Ecological Information: | No information available |
| SECTION 13: Disposal Considerations | |
|---|---|
| Disposal: | Dispose of according to local, state and federal regulations. |
| SECTION 14: Transportation | |
|---|---|
| Shipping Name (CFR): | Non-hazardous |
| Hazard Class (CFR): | NA |
| Additional Hazard Class (CFR): | NA |
| Packaging Group (CFR): | NA |
| UN ID Number (CFR): | NA |
| Shipping Name (IATA): | Non-hazardous |
| Hazard Class (IATA): | NA |
| Additional Hazard Class (IATA): | NA |
| Packaging Group (IATA): | NA |
| UN ID Number (IATA): | NA |
| SECTION 15: Regulatory Information | |
|---|---|
| TSCA: | Not listed in the TSCA inventory. |
| SARA (Title 313): | Not reportable under SARA Title 313 |
| Second Ingredient: | none |
| Third Ingredient: | none |
| SECTION 16: Other Information | |
|---|---|
| Disclaimer: | The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information. |
| Preparation Date: | 6/11/2001 |
| Revision Date: | 10/04/2011 |