| CAS Number: | 126949-63-1 |
| MDL Number: | MFCD00269858 |
| Molecular Formula: | C28H39F6MoNO8S2 |
| Molecular Weight: | 791.68 |
| Chemical Formula: | Mo(C10H12)(C12H17N)(OSO2CF3)2(C4H10O2) |
| Color and Form: | yellow to orange pwdr. |
| Note: |
Stability: air sensitive, moisture sensitive, store cold
| SECTION 1: Product Identification | |
|---|---|
| Chemical Name: | 2,6-Diisopropylphenylimido neophylidenemolybdenum (VI) bis(trifluoromethanesulfonate)dimethoxyethane adduct |
| Product Number: | 42-1210 |
| CAS Registry Number: | 126949-63-1 |
| Formula: | Mo(C10H12)(C12H17N)(OSO2CF3)2(C4H10O2) |
| EINECS Number: | none |
| Chemical Family: | organometallic complexes |
| Synonym: | none |
| SECTION 2: Composition and Information on Ingredients | ||||
|---|---|---|---|---|
| Ingredient | CAS Number | Percent | ACGIH (TWA) | OSHA (PEL) |
| Title Compound | 126949-63-1 | 100 | 10mg/m3 (as Mo) | 15mg/m3 (as Mo) |
| SECTION 3: Hazards Identification | |
|---|---|
| Emergency Overview: | Severe irritant to skin and eyes. Material hydrolyzes in contact with moisture releasing aqueous trifluoromethane sulfonic acid. |
| Primary Routes of Exposure: | Ingestion, inhalation, skin, eyes |
| Eye Contact: | A severe irritant to the eyes. |
| Skin Contact: | Causes severe irritation of the skin causing redness, pain, itching, pimples, boils, hives and blisters. |
| Inhalation: | Inhalation of vapors will lead to irritation of the respiratory tract. |
| Ingestion: | Severe irritation of the Gastrointestinal system may occur. |
| Acute Health Effects: | Irritating to skin, eyes and respiratory tract. May cause dyspnea (breathing difficulty), and pulmonary edema. |
| Chronic Health Effects: | No information available on long-term chronic effects. |
| NTP: | No |
| IARC: | No |
| OSHA: | No |
| SECTION 4: First Aid Measures | |
|---|---|
| Eye Exposure: | Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention. |
| Skin Exposure: | Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. |
| Inhalation: | Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. |
| Ingestion: | Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel. |
| SECTION 5: Fire Fighting Measures | |
|---|---|
| Flash Point: | not applicable |
| Autoignition Temperature: | no data |
| Explosion Limits: | no data |
| Extinguishing Medium: | carbon dioxide, foam or dry powder |
| Special Fire Fighting Procedures: | If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing. |
| Hazardous Combustion and Decomposion Products: | This material may emit toxic organic fumes and hydrogen fluoride, carbonyl fluoride, and sulfur dioxide. |
| Unusual Fire or Explosion Hazards: | No unusual fire or explosion hazards. |
| SECTION 6: Accidental Release Measures | |
|---|---|
| Spill and Leak Procedures: | Small spills can be neutralized with sodium carbonate, sodium bicarbonate or lime. The solids can then be swept up and properly disposed of. |
| SECTION 7: Handling and Storage | |
|---|---|
| Handling and Storage: | Store material under argon in a tightly sealed bottle away from air and moisture. If possible, handle material in an efficient fume hood. |
| SECTION 8: Exposure Controls and Personal Protection | |
|---|---|
| Eye Protection: | Always wear approved safety glasses when handling a chemical substance in the laboratory. |
| Skin Protection: | Wear appropriate chemical resistant gloves and protective clothing. |
| Ventilation: | If possible, handle the material in an efficient fume hood. |
| Respirator: | In the absence of adequate ventilation a respirator should be worn. The use of a respiratory requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134. |
| Additional Protection: | No additional protection required. |
| SECTION 9: Physical and Chemical Properties | |
|---|---|
| Color and Form: | yellow to orange pwdr. |
| Molecular Weight: | 791.68 |
| Melting Point: | no data |
| Boiling Point: | no data |
| Vapor Pressure: | no data |
| Specific Gravity: | no data |
| Odor: | none |
| Solubility in Water: | reacts with water |
| SECTION 10: Stability and Reactivity | |
|---|---|
| Stability: | air sensitive, moisture sensitive |
| Hazardous Polymerization: | no hazardous polymerization |
| Conditions to Avoid: | Contact with air or moisture. |
| Incompatibility: | oxidizing agents and halogens |
| Decomposition Products: | carbonyl fluoride, carbon monoxide, organic fumes, hydrogen fluoride, and sulfur dioxide. |
| SECTION 11: Toxicological Information | |
|---|---|
| RTECS Data: | No information available in the RTECS files. |
| Carcinogenic Effects: | No data available |
| Mutagenic Effects: | No data available |
| Tetratogenic Effects: | No data available |
| SECTION 12: Ecological Information | |
|---|---|
| Ecological Information: | No information available |
| SECTION 13: Disposal Considerations | |
|---|---|
| Disposal: | Dispose of according to local, state and federal regulations. |
| SECTION 14: Transportation | |
|---|---|
| Shipping Name (CFR): | Non-hazardous |
| Hazard Class (CFR): | NA |
| Additional Hazard Class (CFR): | NA |
| Packaging Group (CFR): | NA |
| UN ID Number (CFR): | NA |
| Shipping Name (IATA): | Non-hazardous |
| Hazard Class (IATA): | NA |
| Additional Hazard Class (IATA): | NA |
| Packaging Group (IATA): | NA |
| UN ID Number (IATA): | NA |
| SECTION 15: Regulatory Information | |
|---|---|
| TSCA: | Not listed in the TSCA inventory. |
| SARA (Title 313): | Title compound not listed. |
| Second Ingredient: | none |
| Third Ingredient: | none |
| SECTION 16: Other Information | |
|---|---|
| Disclaimer: | The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information. |
| Preparation Date: | 12/06/2001 |
| Revision Date: | 12/13/2011 |