Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

CAS Number: 94442-22-5
Product Catalog

98-4024
Platinum (Trimethyl)methylcyclopentadienylplatinum(IV), 99%, 78-1350, contained in 50 ml Swagelok® cylinder (96-1070) for CVD/ALD
CAS Number: 94442-22-5
MDL Number: MFCD00079665
Molecular Formula:  
Molecular Weight: 319.32
Chemical Formula: (CH3)3(CH3C5H4)Pt
Color and Form: off-white pwdr.
Note: High temperature Swagelok® cylinder assembly 96-1071 available at extra cost.

Stability: air sensitive

Physical Characteristics: melting point 30-31°C, boiling point subl. 23°C/0.053mm, density 1.88

98-4024

Please log in or choose your country below to view prices.

Choose Your Country

All New New (not in print catalog)
SECTION 1: Product Identification
Chemical Name: (Trimethyl)methylcyclopentadienylplatinum(IV), 99%, 78-1350, contained in 50 ml Swagelok® cylinder (96-1070) for CVD/ALD
Product Number: 98-4024
CAS Registry Number: 94442-22-5
Formula: (CH3)3(CH3C5H4)Pt
EINECS Number: none
Chemical Family: metallocene
Synonym: none
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title Compound 94442-22-5 100 1mg/m3 (as Pt) no data
SECTION 3: Hazards Identification
Emergency Overview: No particular hazard associated with this material.
Primary Routes of Exposure: Ingestion
Eye Contact: May cause slight to mild irritation of the eyes.
Skin Contact: May cause slight to mild irritation of the skin.
Inhalation: May be irritating to the nose, mucous membranes and respiratory tract.
Ingestion: No information on the physiological effects of ingestion.
Acute Health Effects: May be irritating to skin, eyes and respiratory tract.
Chronic Health Effects: No information available on long-term chronic effects.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: not applicable
Autoignition Temperature: none
Explosion Limits: none
Extinguishing Medium: carbon dioxide, foam or dry powder
Special Fire Fighting Procedures: If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: If involved in a fire, this material may emit irritating fumes.
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: Small spills can be mixed with vermiculite, sodium carbonate or other suitable non-combustible adsorbent and swept up.
SECTION 7: Handling and Storage
Handling and Storage: Store in a tightly sealed container. Keep away from heat and direct sunlight.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear protective clothing and gloves.
Ventilation: Handle the material in an efficient fume hood.
Respirator: If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: off-white powder
Molecular Weight: 319.32
Melting Point: none
Boiling Point: (subl. 23? C/0.053mm)
Vapor Pressure: no data
Specific Gravity: 1.88
Odor: metallic odor
Solubility in Water: insoluble
SECTION 10: Stability and Reactivity
Stability: air sensitive
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: prolonged contact with air
Incompatibility: oxidizing agents
Decomposition Products: carbon dioxide, carbon monoxide, organic fumes, platinum compounds
SECTION 11: Toxicological Information
RTECS Data: No information available from the RTECS files.
Carcinogenic Effects: no data
Mutagenic Effects: no data
Tetratogenic Effects: no data
SECTION 12: Ecological Information
Ecological Information: No information available.
SECTION 13: Disposal Considerations
Disposal: Dispose of this material according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Listed in the TSCA inventory
SARA (Title 313): Title compound not listed
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 4/21/2011
Revision Date: 4/21/2011

Enter a lot number

back to search results