| CAS Number: | 1345-07-9 |
| MDL Number: | MFCD00014204 |
| Molecular Formula: | Bi2S3 |
| Molecular Weight: | 514.15 |
| Chemical Formula: | Bi2S3 |
| Color and Form: | gray to black pwdr. |
| Note: |
Physical Characteristics: melting point 685°C dec., density 7.39
| SECTION 1: Product Identification | |
|---|---|
| Chemical Name: | Bismuth (III) sulfide (99.999%-Bi) PURATREM |
| Product Number: | 93-8351 |
| CAS Registry Number: | 1345-07-9 |
| Formula: | Bi2S3 |
| EINECS Number: | 215-716-0 |
| Chemical Family: | metal chalcogenides |
| Synonym: | Bismuth sesquisulfide |
| SECTION 2: Composition and Information on Ingredients | ||||
|---|---|---|---|---|
| Ingredient | CAS Number | Percent | ACGIH (TWA) | OSHA (PEL) |
| Title Compound | 1345-07-9 | 100 | no data | no data |
| SECTION 3: Hazards Identification | |
|---|---|
| Emergency Overview: | May form highly toxic and flammable hydrogen sulfide gas on exposure to acids or stomach fluids. May cause mild irritation of the eyes. May cause mild kidney damage. |
| Primary Routes of Exposure: | Ingestion, inhalation, skin and eyes |
| Eye Contact: | Dust may cause moderate irritation of the eyes. |
| Skin Contact: | May cause slight irritation of the skin. |
| Inhalation: | Inhalation of dust can lead to irritation of the respiratory tract. Hydrogen sulfide gas, if formed, is poisonous. |
| Ingestion: | Gastric juices may cause release of toxic hydrogen sulfide. Large amounts of bismuth are toxic if ingested. |
| Acute Health Effects: | Hydrogen sulfide gas may cause painful conjunctivitis, headache, nausea, dizziness, pulmonary edema and possible death. |
| Chronic Health Effects: | Prolonged exposure to bismuth compounds can cause metal line on gums, foul breath, and mild kidney damage. |
| NTP: | No |
| IARC: | No |
| OSHA: | No |
| SECTION 4: First Aid Measures | |
|---|---|
| Eye Exposure: | Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention. |
| Skin Exposure: | Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists. |
| Inhalation: | Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. |
| Ingestion: | Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel. |
| SECTION 5: Fire Fighting Measures | |
|---|---|
| Flash Point: | not applicable |
| Autoignition Temperature: | no data |
| Explosion Limits: | no data |
| Extinguishing Medium: | carbon dioxide or dry powder |
| Special Fire Fighting Procedures: | If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self- contained breathing apparatus and full protective clothing. |
| Hazardous Combustion and Decomposion Products: | If involved in a fire this material may emit irritating fumes of hydrogen sulfide and sulfur dioxide. |
| Unusual Fire or Explosion Hazards: | Dust may form explosive mixtures with air. Contact with acids gives off hydrogen sulfide, a toxic and flammable gas. |
| SECTION 6: Accidental Release Measures | |
|---|---|
| Spill and Leak Procedures: | In the case of a spill, the fine powder should be covered with dry sodium carbonate or dolomite in order to reduce the formation of dust. Sweep up the mixture. |
| SECTION 7: Handling and Storage | |
|---|---|
| Handling and Storage: | Store in a tightly sealed container. Exposure to the atmosphere may lead to release of toxic hydrogen sulfide gas. Empty containers may retain product residues that evolve toxic gases. |
| SECTION 8: Exposure Controls and Personal Protection | |
|---|---|
| Eye Protection: | Always wear approved safety glasses when handling a chemical substance in the laboratory. |
| Skin Protection: | Wear appropriate chemical resistant gloves and protective clothing. |
| Ventilation: | If possible, handle the material in an efficient fume hood. |
| Respirator: | If ventilation is not available a respirator should be worn. The use of a respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134. |
| Additional Protection: | No additional protection required. |
| SECTION 9: Physical and Chemical Properties | |
|---|---|
| Color and Form: | gray to black pwdr. |
| Molecular Weight: | 514.15 |
| Melting Point: | 685°C dec. |
| Boiling Point: | no data |
| Vapor Pressure: | no data |
| Specific Gravity: | 7.39 |
| Odor: | none |
| Solubility in Water: | insoluble |
| SECTION 10: Stability and Reactivity | |
|---|---|
| Stability: | air and moisture stable |
| Hazardous Polymerization: | no hazardous polymerization |
| Conditions to Avoid: | Contact of dust cloud with an ignition source. |
| Incompatibility: | oxidizing agents and mineral acids |
| Decomposition Products: | hydrogen sulfide, sulfur dioxide, and metal oxides. |
| SECTION 11: Toxicological Information | |
|---|---|
| RTECS Data: | Oral (rat); LD50:5 gm/kg. Oral (mouse); LD50: 10 gm/kg. |
| Carcinogenic Effects: | no data |
| Mutagenic Effects: | no data |
| Tetratogenic Effects: | no data |
| SECTION 12: Ecological Information | |
|---|---|
| Ecological Information: | No information available |
| SECTION 13: Disposal Considerations | |
|---|---|
| Disposal: | Dispose of according to local, state and federal regulations. |
| SECTION 14: Transportation | |
|---|---|
| Shipping Name (CFR): | Non-hazardous |
| Hazard Class (CFR): | NA |
| Additional Hazard Class (CFR): | NA |
| Packaging Group (CFR): | NA |
| UN ID Number (CFR): | NA |
| Shipping Name (IATA): | Non-hazardous |
| Hazard Class (IATA): | NA |
| Additional Hazard Class (IATA): | NA |
| Packaging Group (IATA): | NA |
| UN ID Number (IATA): | NA |
| SECTION 15: Regulatory Information | |
|---|---|
| TSCA: | Listed in the TSCA inventory |
| SARA (Title 313): | Title compound not listed. |
| Second Ingredient: | none |
| Third Ingredient: | none |
| SECTION 16: Other Information | |
|---|---|
| Disclaimer: | The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information. |
| Preparation Date: | 10/29/2001 |
| Revision Date: | 10/24/2011 |