Product Catalog
CAS Number: 7647-18-9

51-2200

Antimony › Antimony(V) chloride, ultradry (99.9995%-Sb) PURATREM

Stability: moisture sensitive

Safety: Hazardous

Physical Characteristics: melting point 2.8°C, boiling point 79°C/22mm, density 2.336

Please log in or choose your country below to view prices.

SECTION 1: Product Identification
Chemical Name:	Antimony(V) chloride, ultradry (99.9995%-Sb) PURATREM
Product Number:	51-2200
CAS Registry Number:	7647-18-9
Formula:	SbCl5
EINECS Number:	231-601-8
Chemical Family:	metal halide
Synonym:	Antimonpentachloride, Pentachloroantimony

SECTION 2: Composition and Information on Ingredients
Ingredient	CAS Number	Percent	ACGIH (TWA)	OSHA (PEL)
Title Compound	7647-18-9	100	0.5mg/m3 (as Sb)	0.5mg/m3 (as Sb)

SECTION 3: Hazards Identification
Emergency Overview:	Harmful by inhalation and if swallowed. Material hydrolyzes in contact with moisture releasing toxic and corrosive fumes of hydrogen chloride and aqueous hydrochloric acid.
Primary Routes of Exposure:	Inhalation, skin, eyes
Eye Contact:	Causes burns.
Skin Contact:	Causes burns to the skin, dermatitis and skin eruptions.
Inhalation:	Forms hydrogen bromide in the presence of moisture. Inhalation can lead to chemical burns to the respiratory tract.
Ingestion:	Harmful if swallowed.
Acute Health Effects:	Harmful through inhalation and if swallowed. Corrosive to skin, eyes and respiratory tract. Causes eye, skin burns, breathing difficulty, and pulmonary edema. Possible risk of irreversible effects.
Chronic Health Effects:	Prolonged exposure to antimony compounds can cause dry throat, bleeding gums, laryngitis, headache, anemia, nervous complaints and skin eruptions. Antimony compounds affect liver, kidney and heart.
NTP:	No
IARC:	No
OSHA:	No

SECTION 4: First Aid Measures
Eye Exposure:	Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure:	Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation:	Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:	Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:	not applicable
Autoignition Temperature:	none
Explosion Limits:	none
Extinguishing Medium:	none required
Special Fire Fighting Procedures:	If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products:	If involved in a fire this material may emit toxic chlorine and hydrochloric acid fumes.
Unusual Fire or Explosion Hazards:	No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:	Small spills can be mixed with powdered sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:	Store material in a tightly sealed bottle away from moisture. If possible, handle material in an efficient fume hood. Prolonged exposure to the atmosphere will lead to degradation of the product.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:	Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:	Wear protective clothing and gloves. Consult glove manufacturer to determine the proper type of glove.
Ventilation:	This product should only be handled in an efficient fume hood.
Respirator:	In the absence of adequate ventilation a respirator should be worn. The use of a respiratory requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection:	No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:	yellow liq.
Molecular Weight:	299.02
Melting Point:	2.8°C
Boiling Point:	79°C /22mm
Vapor Pressure:	no data
Specific Gravity:	2.336
Odor:	Pungent odor
Solubility in Water:	reacts with water

SECTION 10: Stability and Reactivity
Stability:	moisture sensitive
Hazardous Polymerization:	no hazardous polymerization
Conditions to Avoid:	contact with moisture
Incompatibility:	water, mineral acids, oxidizing agents and active metals
Decomposition Products:	chlorine, and antimony trichloride

SECTION 11: Toxicological Information
RTECS Data:	Oral (rat); LD50: 1115 mg/kg. Inhalation (rat); LC50: 720 mg/m3/2H. Inhalation (mouse); LC50: 620 mg/m3. Oral (guinea pig); LD50: 900 mg/kg. DNA repair; Bacteria - Bacillus subtitles: 65 ug/disc.
Carcinogenic Effects:	No data available
Mutagenic Effects:	No data available
Tetratogenic Effects:	No data available

SECTION 12: Ecological Information
Ecological Information:	Avoid release to the environment. Toxic to aquatic organisms. May cause long-term adverse effects in the environment.

SECTION 13: Disposal Considerations
Disposal:	This material and its container must be disposed of as hazardous waste according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):	Antimony pentachloride, liquid
Hazard Class (CFR):	8
Additional Hazard Class (CFR):	NA
Packaging Group (CFR):	II
UN ID Number (CFR):	UN# 1730
Shipping Name (IATA):	Antimony pentachloride, liquid
Hazard Class (IATA):	8
Additional Hazard Class (IATA):	NA
Packaging Group (IATA):	II
UN ID Number (IATA):	UN# 1730

SECTION 15: Regulatory Information
TSCA:	Listed in the TSCA inventory
SARA (Title 313):	Title compound see Category Code N010 for reporting.
Second Ingredient:	none
Third Ingredient:	none

SECTION 16: Other Information
Disclaimer:	The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date:	3/20/2001
Revision Date:	8/01/2011