Product Catalog

42-0350

Molybdenum › Cycloheptatriene molybdenum tricarbonyl, 99%

Stability: air sensitive, store cold

Physical Characteristics: melting point 100-101°C

Please log in or choose your country below to view prices.

Buy 5 - 9 of an item and get a 5% discount.
Buy 10 or more of an item and get a 10% discount.

SECTION 1: Product Identification
Chemical Name:	Cycloheptatriene molybdenum tricarbonyl, 99%
Product Number:	42-0350
CAS Registry Number:	12125-77-8
Formula:	C7H8Mo(CO)3
EINECS Number:	235-197-4
Chemical Family:	metal carbonyl complexes
Synonym:	none

SECTION 2: Composition and Information on Ingredients
Ingredient	CAS Number	Percent	ACGIH (TWA)	OSHA (PEL)
Title Compound	12125-77-8	100	10mg/m3 (as Mo-	15mg/m3

SECTION 3: Hazards Identification
Emergency Overview:	Irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure:	Ingestion, inhalation, skin, eyes
Eye Contact:	Causes slight or mild irritation of the eyes.
Skin Contact:	Causes slight to mild irritation of the skin.
Inhalation:	Irritating to the nose, mucous membranes and respiratory tract.
Ingestion:	No information available on the effects from ingestion.
Acute Health Effects:	Irritating to skin, eyes and respiratory tract.
Chronic Health Effects:	No information on long term exposure.
NTP:	No
IARC:	No
OSHA:	No

SECTION 4: First Aid Measures
Eye Exposure:	Immediately flush the eyes with copious amounts of water for at least 15 minutes. A victim will need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure:	Wash the affected area immediately with water. Remove contaminated clothing if necessary. Seek medical assistance if irritation persists.
Inhalation:	Remove victim to fresh air immediately. Keep the victim lying down and warm. Give oxygen as soon as possible. If shock occurs, respond with appropriate first aid. Transport the victim to a hospital.
Ingestion:	Seek medical attention immediately. Keep the victim calm. Give water to dilute the toxin (only if conscious). Induce vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:	not applicable
Autoignition Temperature:	no data
Explosion Limits:	no data
Extinguishing Medium:	carbon dioxide, dry chemical or foam
Special Fire Fighting Procedures:	If involved in a fire, fire fighters should be equipped with a NIOSH-approved positive pressure self-contained breathing apparatus.
Hazardous Combustion and Decomposion Products:	carbon monoxide, carbon dioxide, and molybdenum oxide.
Unusual Fire or Explosion Hazards:	No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:	Small quantities can be mixed with sodium carbonate or vermiculite and swept up.

SECTION 7: Handling and Storage
Handling and Storage:	Store in a cool, dry, well-ventilated area away from heat and direct sunlight. Keep containers tightly sealed. Prolonged exposure to the air may result in degradation of the product. For maximum shelf-life store the product below 10�C.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:	Always wear approved safety glasses when handling chemical substances.
Skin Protection:	Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.
Ventilation:	This product should be handled in an efficient fume hood.
Respirator:	If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance 29 CFR 1910.134.
Additional Protection:	No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:	orange to red xtl.
Molecular Weight:	272.11
Melting Point:	100-101°C
Boiling Point:	no data
Vapor Pressure:	no data
Specific Gravity:	no data
Odor:	none
Solubility in Water:	insoluble

SECTION 10: Stability and Reactivity
Stability:	air sensitive, (store cold)
Hazardous Polymerization:	no hazardous polymerization
Conditions to Avoid:	prolonged contact with air.
Incompatibility:	oxidizing agents and halogens
Decomposition Products:	carbon dioxide, carbon monoxide, organic fumes, and molybdenum oxides.

SECTION 11: Toxicological Information
RTECS Data:	Intravenous (mouse); LD50: 32 mg/kg.
Carcinogenic Effects:	No data available
Mutagenic Effects:	No data available
Tetratogenic Effects:	No data available

SECTION 12: Ecological Information
Ecological Information:	No information available.

SECTION 13: Disposal Considerations
Disposal:	Dispose of this material according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):	Non-hazardous
Hazard Class (CFR):	NA
Additional Hazard Class (CFR):	NA
Packaging Group (CFR):	NA
UN ID Number (CFR):	NA
Shipping Name (IATA):	Non-hazardous
Hazard Class (IATA):	NA
Additional Hazard Class (IATA):	NA
Packaging Group (IATA):	NA
UN ID Number (IATA):	NA

SECTION 15: Regulatory Information
TSCA:	Not listed in the TSCA inventory.
SARA (Title 313):	Not reportable under SARA Title 313.
Second Ingredient:	none
Third Ingredient:	none

SECTION 16: Other Information
Disclaimer:	The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date:	8/07/2000
Revision Date:	12/15/2003