CAS Number: 80289-21-0
Product Catalog

29-8400

Copper › Bis(6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionate)copper(II) [Cu(FOD)2]

Stability: moisture sensitive

Physical Characteristics: melting point 68-69°C, boiling point dec. 280°C (subl. 100°C/0.1mm)

Please log in or choose your country below to view prices.

SECTION 1: Product Identification
Chemical Name:	Bis(6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionate)copper (II) Cu(FOD)2
Product Number:	29-8400
CAS Registry Number:	80289-21-0
Formula:	Cu(C10H10F7O2)2
EINECS Number:	none
Chemical Family:	metal fluorobeta-diketonate complexes
Synonym:	Copper (II) FOD

SECTION 2: Composition and Information on Ingredients
Ingredient	CAS Number	Percent	ACGIH (TWA)	OSHA (PEL)
Title compound	80289-21-0	100	2.5mg/m3 (as F)	2.5mg/m3 (as F)

SECTION 3: Hazards Identification
Emergency Overview:	No particular hazard associated with this material.
Primary Routes of Exposure:	Ingestion, inhalation
Eye Contact:	May cause slight to mild irritation of the eyes
Skin Contact:	May cause slight to mild irritation of the skin.
Inhalation:	May be irritating to the nose, mucous membranes and respiratory tract.
Ingestion:	Ingestion of copper compounds may lead to vomiting, exhaustion, anemia, convulsions and coma.
Acute Health Effects:	May be irritating to skin, eyes and respiratory tract.
Chronic Health Effects:	No information on long-term chronic effects. Prolonged exposure to hydrolysable fluorine compounds can cause deterioration of bone and tooth structure.
NTP:	No
IARC:	No
OSHA:	No

SECTION 4: First Aid Measures
Eye Exposure:	Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure:	Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation:	Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:	Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:	none
Autoignition Temperature:	none
Explosion Limits:	none
Extinguishing Medium:	carbon dioxide, foam or dry powder
Special Fire Fighting Procedures:	If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products:	If involved in a fire this material may emit irritating fumes.
Unusual Fire or Explosion Hazards:	No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:	Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:	Store in a tightly sealed container. Handle the material in a ventilated area. Prolonged contact with the atmosphere may lead to degradation.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:	Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:	Wear protective clothing and gloves.
Ventilation:	If possible, handle the material in an efficient fume hood.
Respirator:	If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection:	No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:	blue to purple powder
Molecular Weight:	653.92
Melting Point:	68-69°C
Boiling Point:	>280°C (decomposes)
Vapor Pressure:	sublimes (100°C/0.1mm)
Specific Gravity:	no data
Odor:	none
Solubility in Water:	insoluble

SECTION 10: Stability and Reactivity
Stability:	moisture-sensitive solid
Hazardous Polymerization:	none
Conditions to Avoid:	contact with strong oxidizing agents, acetylene and azides
Incompatibility:	oxidizing agents, acetylene and azides
Decomposition Products:	carbon dioxide, carbon monoxide, organic fumes, fluorinated organic fumes and copper oxide.

SECTION 11: Toxicological Information
RTECS Data:	No information available in RTECS.
Carcinogenic Effects:	No data available
Mutagenic Effects:	No data available
Tetratogenic Effects:	No data available

SECTION 12: Ecological Information
Ecological Information:	No information available

SECTION 13: Disposal Considerations
Disposal:	Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):	Non-hazardous
Hazard Class (CFR):	NA
Additional Hazard Class (CFR):	NA
Packaging Group (CFR):	NA
UN ID Number (CFR):	NA
Shipping Name (IATA):	Non-hazardous
Hazard Class (IATA):	NA
Additional Hazard Class (IATA):	NA
Packaging Group (IATA):	NA
UN ID Number (IATA):	NA

SECTION 15: Regulatory Information
TSCA:	not listed on the TSCA inventory
SARA (Title 313):	Title Compound: see Category Code N100 for reporting.
Second Ingredient:	none
Third Ingredient:	none

SECTION 16: Other Information
Disclaimer:	The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date:	8/21/1999
Revision Date:	10/04/2011