Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

Product Catalog

26-0011
Cobalt Iron-cobalt nanoparticles
CAS Number:
MDL Number: MFCD00676752
Molecular Formula:  
Molecular Weight:  
Chemical Formula: Fe×Co (x=1-2)
Color and Form: 5-8 nm; black pwdr.
Note: Made to order. Suggest use within 3 months of receipt. Long term shelf life not established.

Safety: Hazardous

Please log in or choose your country below to view prices.

Choose Your Country

SECTION 1: Product Identification
Chemical Name: Iron-cobalt nanoparticles
Product Number: 26-0011
CAS Registry Number: not available
Formula: FexCo (x=1-2)
EINECS Number: none
Chemical Family: nano structured metal particles
Synonym: none
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title compound not available 100 0.02mg/m3 (as Co) 0.1mg/m3 (as Co)
SECTION 3: Hazards Identification
Emergency Overview: May be irritating to skin, eyes and respiratory tract. May be harmful if swallowed. Limited evidence of a carcinogenic effect
Primary Routes of Exposure: Contact with skin, eyes. Dust inhalation
Eye Contact: May cause mild to moderate irritation of the eyes.
Skin Contact: Causes irritation of the skin. May cause sensitization in contact with skin.
Inhalation: May be irritating to the nose, mucous membranes and respiratory tract. May cause sensitization by inhalation.
Ingestion: Harmful if swallowed.
Acute Health Effects: May be irritating to skin, eyes and respiratory tract. May be harmful if swallowed.
Chronic Health Effects: May cause sensitization by inhalation and skin contact. Limited evidence of a carcinogenic effect. Possible risk of irreversible effects.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)
SECTION 5: Fire Fighting Measures
Flash Point: no data
Autoignition Temperature: no data
Explosion Limits: no data
Extinguishing Medium: carbon dioxide, dry powder or foam
Special Fire Fighting Procedures: If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: If involved in a fire, burning metal may produce mildly irritating fumes of iron oxide
Unusual Fire or Explosion Hazards: Flammable solid. Dust may form explosive mixtures with air.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: In the case of a spill, the material should be covered with dry soda ash, limestone or sand. Place in open container.
SECTION 7: Handling and Storage
Handling and Storage: Store in a tightly sealed container in a cool, dry place. Use good housekeeping practice to avoid accumulation of spilled dust and so avoid the resulting fire hazard from ignition sources such as static electricity and open flame.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear protective clothing and flame proof insulated gloves.
Ventilation: If possible, handle the material in an efficient fume hood.
Respirator: If ventilation is not available, a respirator should be worn. The use of respirators requires a Respiratory Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: Wear a full face shield.
SECTION 9: Physical and Chemical Properties
Color and Form: 5-8 nm, black powder
Molecular Weight: not applicable
Melting Point: no data
Boiling Point: no data
Vapor Pressure: no data
Specific Gravity: no data
Odor: none
Solubility in Water: insoluble
SECTION 10: Stability and Reactivity
Stability: air and moisture stable
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: ignition sources
Incompatibility: Mineral acids, halogens, acetylene, hydrazinium nitrate, oxidizing agents, sulfur.
Decomposition Products: metal oxides and carbonates.
SECTION 11: Toxicological Information
RTECS Data: No information available in the RTECS files.
Carcinogenic Effects: no data
Mutagenic Effects: no data
Tetratogenic Effects: no data
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Metal powder, Flammable, N.O.S.
Hazard Class (CFR): 4.1
Additional Hazard Class (CFR): NA
Packaging Group (CFR): II
UN ID Number (CFR): UN# 3089
Shipping Name (IATA): Metal powder, Flammable, N.O.S.
Hazard Class (IATA): 4.1
Additional Hazard Class (IATA): NA
Packaging Group (IATA): II
UN ID Number (IATA): UN# 3089
SECTION 15: Regulatory Information
TSCA: Not listed in the TSCA inventory
SARA (Title 313): See Category Code N096 for reporting.
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 2/10/2005
Revision Date: 12/19/2011

Enter a lot number

back to search results