Search for a full or partial Catalog Number, CAS Number or description
Your favorites Quick Order Form
Your cart is empty.
Home Catalog New Products Custom Synthesis & CGMP Product Resources About
Contact Strem

CAS Number: 7631-86-9
Product Catalog

14-6012
Nanomaterials Silica Nanosprings™ grown on fiber glass substrate (3.5 x 8cm)
CAS Number: 7631-86-9
MDL Number: MFCD00011232
Molecular Formula:  
Molecular Weight:  
Chemical Formula:  
Color and Form: reddish white plate
Note: Sold under license from GoNano for research purposes only. US 11-993,452 & PCT WO2007/002369A3.

Physical Characteristics: form Nanospring™ Mass: 0.5±0.09mg/cm2; Structure: Amorphous. Multiple springs form a larger Nanospring™. Wire diameter: 87.1±45.2nm; Coil diameter: 191.8±43.6nm; Coil Pitch: 315.5±110.5nm, surface area 350m2/g

14-6012

Please log in or choose your country below to view prices.

Choose Your Country

All New New (not in print catalog)
SECTION 1: Product Identification
Chemical Name: Silica Nanosprings™ grown on fiber glass substrate (3.5 x 8cm)
Product Number: 14-6012
CAS Registry Number: 7631-86-9
Formula: O2Si
EINECS Number: none
Chemical Family: nano structured material
Synonym: none
SECTION 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title compound 7631-86-9 100 10mg/m3 30mg/m3
SECTION 3: Hazards Identification
Emergency Overview: No particular hazard associated with this material. May be irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure: Inhalation
Eye Contact: May cause slight to mild irritation of the eyes.
Skin Contact: May cause slight to mild irritation of the skin.
Inhalation: May be irritating to the nose, mucous membranes and respiratory tract.
Ingestion: No information available on the physiological effects of ingestion. May be harmful if swallowed.
Acute Health Effects: May be irritating to skin, eyes and respiratory tract.
Chronic Health Effects: No information on long-term chronic effects. Prolonged exposure of silica dust can produce silicosis with impairment of the cardiopulmonary system.
NTP: No
IARC: No
OSHA: No
SECTION 4: First Aid Measures
Eye Exposure: Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure: Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation: Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion: Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point: no data
Autoignition Temperature: none
Explosion Limits: none
Extinguishing Medium: carbon dioxide, dry powder or foam
Special Fire Fighting Procedures: If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products: If involved in a fire this material may emit irritating organic fumes.
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures: Small spills can be mixed with vermiculite or sodium carbonate and swept up.
SECTION 7: Handling and Storage
Handling and Storage: Store in a tightly sealed container. Keep in a cool, dry, well-ventilated area.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection: Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection: Wear protective clothing and gloves.
Ventilation: Handle the material in an efficient fume hood.
Respirator: If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection: No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form: red plate
Molecular Weight: not applicable
Melting Point: no data
Boiling Point: no data
Vapor Pressure: no data
Specific Gravity: no data
Odor: none
Solubility in Water: insoluble
SECTION 10: Stability and Reactivity
Stability: air and moisture stable
Hazardous Polymerization: no hazardous polymerization
Conditions to Avoid: none
Incompatibility: hydrogen fluoride, chlorine trifluoride
Decomposition Products: none
SECTION 11: Toxicological Information
RTECS Data: For Silica: Administration into the eye (rabbit); Standard Draize test: 25 mg/24H. Oral (rat); LDLo: 5 gm/kg. Inhalation (rat); LCLo: 2190 mg/m3/4H. Inhalation (rat); TCLo: 30 mg/m3/6H/6W-I.
Carcinogenic Effects: no data
Mutagenic Effects: no data
Tetratogenic Effects: no data
SECTION 12: Ecological Information
Ecological Information: No information available
SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR): Non-hazardous
Hazard Class (CFR): NA
Additional Hazard Class (CFR): NA
Packaging Group (CFR): NA
UN ID Number (CFR): NA
Shipping Name (IATA): Non-hazardous
Hazard Class (IATA): NA
Additional Hazard Class (IATA): NA
Packaging Group (IATA): NA
UN ID Number (IATA): NA
SECTION 15: Regulatory Information
TSCA: Silica: Listed in the TSCA inventory
SARA (Title 313): Not reportable under SARA 313
Second Ingredient: none
Third Ingredient: none
SECTION 16: Other Information
Disclaimer: The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date: 1/27/2011
Revision Date: 2/24/2012

back to search results