CAS Number: 69207-83-6
Product Catalog

12-1100

Magnesium › Magnesium aluminum i-propoxide (99.99%-Mg) PURATREM

Stability: moisture sensitive

Safety: Hazardous

Physical Characteristics: melting point 40°C, boiling point 110°C/5 mm

Please log in or choose your country below to view prices.

SECTION 1: Product Identification
Chemical Name:	Magnesium aluminum i-propoxide(99.99%-Mg) PURATREM
Product Number:	12-1100
CAS Registry Number:	69207-83-6
Formula:	MgAl2(OC3H7)8
EINECS Number:	not available
Chemical Family:	metal alkoxide
Synonym:	Aluminum magnesium isopropoxide

SECTION 2: Composition and Information on Ingredients
Ingredient	CAS Number	Percent	ACGIH (TWA)	OSHA (PEL)
Title Compound	69207-83-6	100	10mg/m3 (as Al2O3)	no data

SECTION 3: Hazards Identification
Emergency Overview:	The dust may moderately irritate the skin, eyes, and respiratory system. Moisture will produce isopropanol vapor which may cause drowsiness.
Primary Routes of Exposure:	Inhalation, ingestion, contact with skin and eyes.
Eye Contact:	May cause moderate irritation of the eyes.
Skin Contact:	Dehydrating agent. Liquid may cause mild irritation of the skin.
Inhalation:	Isopropanol vapor may be irritating to the nose and respiratory tract and cause headache, dizziness, and drowsiness.
Ingestion:	Ingestion may cause gastrointestinal distress, dizziness, weakness, and drowsiness.
Acute Health Effects:	The dust may moderately irritate the skin, eyes, and respiratory system. Moisture will produce isopropanol vapor which may cause drowsiness.
Chronic Health Effects:	In animal studies isopropanol has acted as a mutagen, tumorigen and reproductive effector. Prolonged exposure can damage nerves, kidneys, and the cardiovascular system.
NTP:	No
IARC:	No
OSHA:	No

SECTION 4: First Aid Measures
Eye Exposure:	Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
Skin Exposure:	Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
Inhalation:	Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:	Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious).

SECTION 5: Fire Fighting Measures
Flash Point:	not applicable
Autoignition Temperature:	no data
Explosion Limits:	no data
Extinguishing Medium:	carbon dioxide, dry powder or foam
Special Fire Fighting Procedures:	If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus and full protective clothing.
Hazardous Combustion and Decomposion Products:	If involved in a fire this material may emit toxic organic fumes and alumina and magnesia dust.
Unusual Fire or Explosion Hazards:	Highly flammable material. Dust may form explosive mixtures with air.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:	Eliminate all ignition sources. Avoid contact with water. Small spills may be adsorbed into diatomaceous earth, sand, or other suitable adsorbent, and swept up.

SECTION 7: Handling and Storage
Handling and Storage:	Store in a tightly sealed container in a cool dry place. If container is left open, product may adsorb moisture and carbon dioxide from the atmosphere and release isopropanol vapor.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:	Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:	Wear protective clothing and gloves.
Ventilation:	Material may form a vapor upon exposure to air. if possible, handle the material in an efficient fume hood.
Respirator:	If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Additional Protection:	No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:	white xtl
Molecular Weight:	550.97
Melting Point:	40°C
Boiling Point:	110°C/5 mm
Vapor Pressure:	no data
Specific Gravity:	no data
Odor:	alcohol-like odor
Solubility in Water:	Reacts with water

SECTION 10: Stability and Reactivity
Stability:	moisture sensitive
Hazardous Polymerization:	no hazardous polymerization
Conditions to Avoid:	Keep away from moisture, heat and ignition sources including open flame and electrostatic discharge.
Incompatibility:	Water, oxidizing agents, and halogens
Decomposition Products:	Carbon dioxide, carbon monoxide, organic vapors, soot, and metal oxides and carbonates.

SECTION 11: Toxicological Information
RTECS Data:	No information available in the RTECS files.
Carcinogenic Effects:	No data available
Mutagenic Effects:	No data available
Tetratogenic Effects:	No data available

SECTION 12: Ecological Information
Ecological Information:	No information available

SECTION 13: Disposal Considerations
Disposal:	Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):	Flammable solids, Organic, N.O.S.
Hazard Class (CFR):	4.1
Additional Hazard Class (CFR):	NA
Packaging Group (CFR):	II
UN ID Number (CFR):	UN# 1325
Shipping Name (IATA):	Flammable solid, Organic, N.O.S.
Hazard Class (IATA):	4.1
Additional Hazard Class (IATA):	NA
Packaging Group (IATA):	II
UN ID Number (IATA):	UN# 1325

SECTION 15: Regulatory Information
TSCA:	Not listed in the TSCA inventory.
SARA (Title 313):	Not reportable under SARA section 313.
Second Ingredient:	none
Third Ingredient:	none

SECTION 16: Other Information
Disclaimer:	The information herein is believed to be accurate and reliable as of the date compiled. However, Strem Chemicals, Inc. makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
Preparation Date:	8/05/2001
Revision Date:	12/14/2011